Breathing easy does not only mean the physical air that you intake daily for survival but It also means that you remain tension and worry-free knowing that your home hvac system and important equipment are running smoothly without any problems. Ranging for your home heating and cooling system to the overhead roof there are several things you need to keep track of.
Residential Water Filtration, Purification, and Softening Systems
Just as you home hvac unit the quality of the water you and your family drink is extremely important and you must take utmost care so that you get pure water at all times. In order to assist you in getting pure and safe water, we are providing water filtration, purification, softening systems repair, installation and maintenance servicein Detroit so that you can drink pure water and live healthy for a long time.
Unlike any under sink filter or filtered water pitcher, the quality of water that comes from the faucet or tap of your house is drastically improved by these whole-house systems. Read the lines below to know about them in a more detailed way.
Water Treatment Services by Detroit Heating Cooling
Whether you live in the city or use well water it is highly important that you get your water quality tested and installwater purification, softening and filtration system if required in order to prevent water contamination. We at Detroit-heating-cooling.com have set up several locations in Detroit where you can test your home water for contaminations, impurities and mineral contentin order to find out whether you need to install a water treatment system for your home or not.
Whole House Water Filtration Systems
In this system, water is run through a microscopic filter which is designed in such a way so that it can easily filter out harmful impurities from the water such as magnesium, chlorine, iron and many more. The growth of bacteria and algae in the water system can also be stopped with the help of water filters as they remove the small particles but cannot give you the same results as the total water purification system. Some of the most widely used whole house water filtration systems include reverse osmosis, distillation and activated carbon filters.
Whole House Water Softener
Mineral-rich water or hard water is mostly found in homes with well or city water systems. Hard water is not so harmful or dangerous but the glassware becomes difficult to clean, the household appliances might get damaged, cloth staining and many other problems. Moreover, hard water can also cause damage to your nails, skin and hairs. If you go for a whole house water softener it will help you soften the water of your home by reducing the mineral content through a process known as an exchange. In this process, hard water is passed through sodium and ions are exchanged in the way resulting in the reduction of mineral content.
Water Purification Systems
Impurities like chlorine or iron are not filtered by water purifiers. Instead, they purify and clean the water by killing algae, viruses and bacteria. Today’s modern water purifiers use ultraviolet light rays to kill and destroy pathogens in water. They also use sanitizing chemicals like chlorine or iodine for purification purposes. Water purification systems are generally considered heavy-duty equipment but what really matters is the quality of the home water which you consume. It is possible that it might contain bacteria but have a large amount of chlorine which makesthe water purification system the most ideal and appropriate form of water treatment.
It is always advisable to take expert opinion before you go ahead with the installation of a water purification system. Get in touch with Detroit-heating-cooling.com who is the leader in this segment and will guide you with the best option.
Thermostat Installation & Thermostat Replacement services Detroit
We believe that home is the best place for anyone to be absolutely comfortable and thus we are committed to providing you with the ultimate heating and cooling experience so that you remain free from any tension or anxiety, Our hvac technicians are working effortlessly so that you can have an ideal indoor temperate and your hvac systems work smoothly for years to come.
The first step for your ideal home comfort begins with the installation of high quality and durable thermostat so that you have a hassle-free heating and cooling experience for years to come. We believe that whether you live in the hottest or coldest places on earth you should have comfortable and constant temperatures at your home and our expert technicians are always focused to meet your demands.
How to Choose the Right Thermostat for Your Home?
The thermostat is one of the main and vital parts of your hvac unit and thus you should choose it very wisely considering all the aspects of your heating and cooling needs at your home. You might go for a traditional thermostat or choose the latest programmable smart thermostat as per your requirement. In order to begin the selection process, you need to identify the type of hvac system that you have at your home. There are two kinds of thermostats available based on the modes of operation which are listed below. Go through the lines below in order to know about them in a detailed manner.
- Low Voltage Thermostats:These types of thermostats are used to regulate systems that rely on boilers, central furnaces and heat pumps for their operation.
- Line Voltage Thermostats: These types of thermostats are used for regulating systems that make use of electric power to heat up homes. Baseboard heating can be a good example of such a type of thermostat.
Once you have identified the type of heating system you have at your home and the type of thermostat you need to go ahead with the selection of a thermostat with the appropriate functionality you think will be ideal for you and your home. Alternatively, you can also rely on us and get in touch with Detroit-heating-cooling.com so that you don’t have to take any hassle and our expert technicians will take care of the entire process.
Thermostat Installation
The installation process of each thermostat will vary based on the make and model of the new thermostat to be installed. In general scenario installation and replacement of thermostat will require certain general tools and basic knowledge of carpentry for the entire process to get through in a hassle-free manner.
The tools that you will need are mentioned below:
- New thermostat
- Masking tape
- Power drill
- A screwdriver with matching tip for both the new and old system
- Drywall or wood screws
You need to follow the instructions mentioned below as per the manufactures recommendation in order to install your new thermostat smoothly without any hassle:
- You need to turn off the power to your hvac system first which might be an air conditioner, furnace or heater and other appliances.
- You need to remove the existing thermostat fitted on the wall.
- The wires need to be disconnected from the back of the thermostat and label properly.
- The new thermostat needs to be connected with the wires protruding out from the wall.
- You need to mound the thermostat to the wall using the hardware included with the new unit
- Lastly, power on the new thermostat and set the temperature as per your requirement.
Importance of Thermostat Replacement
At the initial level replacing your old thermostat with a new and programmable smart thermostat might not seem to be a good option, but before you make your final decision you need to think about the valuable energy that you will save by taking the step. Moreover, it will also lead to huge savings on your monthly utility bills.
When you replace your old fashioned manual thermostat you get the full control of how your hvac will run. It will help you to keep your house at even temperatures when you are inside your home. You will also have the option to turn off or on your AC or heater at times when you are not at home or sleeping.
Why Choose Detroit Heating Cooling For Thermostat Installation and Replacement?
If you need help regarding thermostat installation or replacement chooses none other than us for the best quality services. Our expert team of technicians knows exactly about your requirements and understands your needs and will suggest you the best one as per your usage. Our hvac maintenance team will discuss with you the potential options and will install the new thermostat for you in a smooth and professional manner. They will also program it for ideal temperatures so that you can have the highest level of comfort at your home.
Sump Pump Installation & Services Detroit
You might have heard from your friends or relatives about sump pumps or you might have one at your house. But do you really know what they are? They are extremely vital equipment that plays a crucial role in keeping leak and flood-prone basement dry. Go through the lines below to know about them in detail and whether you need to install one in your basement.
What Is A Sump Pump?
A sump pump is basically an electrical pump that is installed in a sump pit which is dug deep into the basement floor. As the pump is drilled through the foundation water is collected in the sump pit which has seeped under the foundation or has flown from the higher areas of the home’s basement or crawl space. The sump pump does the work of pumping out the water from the basement with the help of the pipe leading to the drain field or sewer of the home.
Installation & Replacement of Sump Pump
Mainly two types of sump pumps are used in households known as pedestal pumps and submersible pumps and both of them have their own advantages and disadvantages. However, both the pumps do the work of moving the water up and out of the basement. Pedestal pumps are comparatively more expensive but for homeowners who want a peaceful environment and worried about noise pollution, the best option is to go for submersible pumps.
It requires a sump pit or a hole in the basement foundation for sump pumps to operate perfectly. In certain cases it might require a jackhammer if the basement is not crawling space with a dirt floor. It is important to make the placement of the sump pump away from the wall so that the foundation footing can be laid properly. As the installation process is a bit complicated we at Detroit-heating-cooling.com recommend it to be done by a heating and cooling technician in order to have a hassle-free installation process. After the installation of the basin is done successfully the hvac technician will go ahead with the installation of the discharge pipe and the pump so that the water can flow out of the basement. The process requires the drilling of a hole in the exterior wall of the house. In the final step, the sump pump needs to be plugged to the GFCI plug. It is advisable not to use any kind of extension cord with the sump pump as it might cause voltage fluctuations and damage the pump permanently. While it is possible to buy sump basins, sump pumps and all the tools required for installation, it is advisable to get it done by a reputed hvac company like Detroit-heating-cooling.com for getting the best results. Any kindly of faulty or improper installation might lead to long term and permanent problems with the foundation.
Sump Pump Repair
It is quite natural to encounter problems with your sump pump just like any other home equipment. A more extensively used sump pump will be likely to get into more problems than a pump which is used less frequently. Thus we have come up with the most common problem with your sump pumps that might require immediate repair or replacement if the repair fails. Have a look at them in the lines mentioned below.
- Float Malfunctioning: As the water in the sump basin rises the float also rises with it and triggers the pump to turn on. If there is any problem with the float and it does not rise there is a chance that the sump basin might get flooded.
- Sump Basin Debris: If there is any debris on the sump basin it might cause malfunctioning of the sump pump itself. It might block the entire water flow and the pump might break or work improperly.
- Electrical Issues: The pump might stop working and the basin will get flooded if there is any problem with the GFCI outlet, motor or the electrical cord.
- Jammed Impeller: The impeller might get jammed by the debris in the pump and the basin might get totally flooded creating a lot of problems.
Why You Need A Sump Pump?
If you have experienced basin flooding in the past it is advisable to install a sump pump in order to avoid such a thing in the future. These pumps have the ability to move a large quantity of water in a short time. Sump pumps are ideally recommended for homes that are:
- Areas with frequent melting of snow and ice
- Near streams and rivers
- Areas of heavy rainstorms
- Soil with less drain capacity
- On land with a high water table
A sump pump installation can be a very good decision for your house. Get in touch with Detroit-heating-cooling.com for professional guidance and expert advice.